Burner lights

I need to install the burner lights and get the wiring sorted out. For those who do not know the burner lights simulate visually the afterburner function. When a certain pre determined throttle setting is reached they flicker and then light up stronger and stronger the same way you would see a full scale after burner light up.

These very bright LED's are controlled by a little  controller box that I will place nearer to the front of the plane for C of G reasons. The wiring will need to be routed for this to work as in the previous post and there needs to be a break and plugs attached so the tail can be removed.

The burner bolts into the fuse and then the tail pipe slips inside it.

Here is the wire harness that I need to cut and add connectors too. Waiting for the connectors to arrive. Should be here today.